King Cornices

New Warwickshire King Cornice137mm x 133mm

New Warwickshire King Cornice 137mm x 133mm
New Warwickshire King Cornice 137mm x 133mm
New Warwickshire King Cornice 137mm x 133mm
New Warwickshire King Cornice 137mm x 133mm
New Warwickshire King Cornice 137mm x 133mm

New Warwickshire King Cornice137mm x 133mm

Product Code: KKC-91002-191
Stock Status: In Stock

The New Warwickshire Cornice from King Cornices is a new addition to our range of Coving. The New Warwickshire King Cornice is a classic Victorian Entrance Hall Cornice with Acanthus corbels and a classic egg and dart bottom border - popular in a range of rooms and in any property. This King Cornice has a projection of 137mm and a drop of 133mm.

King Cornices are hand made using light durable and polyurethane already painted in white primer. We use specialist couriers to deliver all our cornices and coving.

Please note that whilst our King Cornices are priced by the metre, our King Cornice products come in 2.4 metre lengths.

Deliveries to the North of England, the Midlands, the South of England and London are usually weekly, other areas may take 14 days. There may be discounts available for larger orders, call us now on 01723 321 111 to discuss your requirements.  

King Cornices are sold in Metres. Select the unit of measurement before you add these items to your basket. Samples are £2.50.

We sell three different types of coving. It is important to understand the different types of coving as they each have different pros and cons. This product is a KING CORNICE MADE COVING

Product Positives Negatives
Hand Made Plaster Coving

Hand Made plaster coving is made using 2.4m lengths of GRG (Glass Reinforced Gypsum).

Instead of traditional hessian, fibreglass strands are used for strengthening. Therefore, when cutting GRG Hand Made Plaster Coving, you will need a fine tooth saw.

- Excellent value

- lighter than British made coving requiring less fixings.

- very dry so easier to store

- easier to handle as shorter lengths

- very wide range of styles and designs in stock for immediate delivery

- very dry and rigid meaning more finishing required on non flat surfaces.

- will absorb the water out of your adhesive extremely quickly. Your installer will need to spray the product with water before installation to allow the adhesive to grip.

- Requires a finer tooth saw for cutting as a blunt saw or a large tooth saw will not cut the fibreglass strenthening fibres.

- shorter lengths meaning more joins

British Made Plaster Coving

British Made Plaster Coving is made by hand at our factory in North Yorkshire using British Gypsum and is strengthened with wooden slats and hessian.

British made plaster coving is made in traditional 10ft or 3m lengths.

- relatively flexible making it easier to work on uneven surfaces

- slightly damp so easier to cut and easier for filling

- longer lengths meaning there are fewer cuts / joins.

- strengthened with traditional hession and wooden latts so biodegradable

- Made in North Yorkshire

- considerably more expensive than GRG Hand Made Plaster Coving.

- as it is biodegradable, can go mouldy if not stored in dry conditions

- 3m lengths and with a higher water content, British made coving is significantly heavier, requires more support fixings during installation (brass screws and adhesive)

- if stored incorrectly it will warp. The product should be stored on a flat surface.

King Cornice Coving

King Cornice Polyeurathene coving is a strong lightweight coving in traditional styles in 2.4m lengths.

- better value than British made plaster coving, but higher in price than Hand made GRG plaster coving.

- lightweight and easily manipulated.

- relatively flexible for uneven surfaces.

- easily cut

- short lengths mean more joins are required

- Limited number of designs

- Not a traditional product

  • Length:
  • Width:
  • Material:
  • Depth:
  • Projection:
  • Brand:
    King Cornices
  • Product Code:
  • Weight: